And finally view the console firmware version.

Program the brake (regenerative) strength value.

Configure the speed limit value and enabled/disabled status.

Select between imperial (mph) or metric (km/h) units.

The EPS1 menu gives access to the following parameters: * If an invalid code is entered, the display will simply return to the normal display layout.

Repeat step #3 and #4 for all remaining digits.

Push ‘MODE’ once to advance to the next digit.

Using ‘A’ to increase the digit value and ‘G’ to decrease value, enter the first digit.

Hold down both ‘CHRONO’ and ‘MODE’ buttons at the same time until the screen change to four zero (It takes about 2 seconds).

Whatever the user wants to access the configuration menu (3771), diagnostic screen (3772) or remaining variables (3779) the same method must be used: (It is important to remember that the system performance is the same regardless of the firmware versions.)Īll following sections of this document use 4 digit codes. However, it is also possible to upgrade the firmware on all BionX systems. If you own a system with older firmware, we recommend you to call EPS to get assistance as needed. All the previous firmware revisions do not include all the functions mentioned in this document and/or the menu structure can be different. This paper covers the console firmware revision #12 and higher.

Document contents and firmware requirements Press 'Power' one more time to confirm the codeġ.Enter code the 4 digit code by using plus/minus to change each number and 'Power' to move to the next number.Hold down 'Power' and 'Mode' until you see 4 zeroes.Press 'Mode' one more time to confirm the code.Enter the 4 digit code by using plus/minus to change each number and 'Mode' to move to the next number.

Hold down 'Mode' and 'Chrono' until you see 4 zeroes.With the battery installed on your bike, turn the BionX on.

Bionix fitness computer user manual